CHOICE CORE

WHICH SUPPORT CHOOSE

It's possible to choose between different supports, each of which guarantees different performance qualities, based on the characteristics of mechanical resistance, fire resistance and atmospheric agents that are necessary to confer to the panel.

CORE IN ALUMINUM HONEYCOMB

Our aluminum honeycomb, depending on the application of the panel, can be:
> 3003 alloy, 0.05 mm thick;
> 5052 alloy, 0.06 mm thick;
The support is equipped with a micro-hole suitable for the air exchange between the cells to avoid a possible detaching effect caused by an increase in the volumes of air for the heat inside the closed cells.

CORE IN NOMEX® HONEYCOMB

The NOMEX® honeycomb is made of aramid paper impregnated with resin, which guarantees particular fire resistance and moisture resistance and resistance to sea salt.

CORE IN POLYETHYLENE TERAFTALATE -PET- Polyurethane foams

Polyethylene terephthalate whose acronym is PET, a thermoplastic resin, belonging to the family of polyesters, composed of phthalates. It is also used for its electrical properties, chemical resistance, high temperature performance, self-extinguishing. The good mechanical properties and the FST characteristics (fire and fumes) of the material allow it to be used in the naval and construction sectors.

IT'S POSSIBLE TO DEFINE:

CELL DIAMETER

It is possible to choose 2 different cell densities.
A higher density increases the mechanical performance of the panel and the flexural strength against a low increase in weight per cubic meter.
ALUMINUM HONEYCOMB from 3/8 (mm 8.66) corresponding to 40 Kg / mc from 1/4 (6.25 mm corresponding to 80 kg / mc From 1/8 (mm 3,12 corresponding to 120 Kg / mc (recommended for panels with reduced thickness or requiring greater flexural strength)
NOMEX® HONEYCOMB from 1/16 (mm 3,2) corresponding to a weight of 48 Kg / mc from 3/16 (mm 1,8) corresponding to a weight of 60 Kg / mc

SUPPORT THICKNESS

The thickness in combination with the cell diameter defines the mechanical characteristics of the panel. It is possible to realize any thickness on request, starting from mm 8 up to 60 mm.

CHOICE LAYERS

QUANTI STRATI E QUALI
The choice can depend on:
> AESTHETICS, for which it is necessary to identify the stratification necessary to support the chosen external surface.
> PHYSICAL-MECHANICAL NEEDS, for which the stratification must solve a need, such as soundproofing, thermal insulation, resistance to sea salt, atmospheric agents, fire or other.

3B-LAB s.r.l -  Sede operativa: Via G.Galilei, 10 - 22075 Lurate Caccivio - Co - Italy

 Tel. +39.031.49 00 78   -  email: sales@3b-lab.com 

Sede legale - Via Marsala, 31 - 21052 Busto Arsizio - Va - Italy- P.IVA  Cod.Fisc. IT03607200122  -  Cap. Soc. €  75.000,00