PERIMETRAL / INTERNAL FRAMES

WHY CREATE A FRAME OR A MASSELLATION IN THE PANEL

The internal or perimetral frames  masonry to the panel, if studied in an appropriate manner, makes it possible to work the artefact as if it were a traditional panel.

PERIMETRAL FRAMES
Composition of the panel with a perimeter frame on all sides or part of these, for the edging or insertion of hardware.
INTERNAL FRAMES
Composition of the panel with:
> Internal screeds for inserting hardware or for making holes or through holes.
> Inserting pipes for the passage of cables.
It is possible to realize the massellation using different materials:
> Solid aluminum
> Aluminum tubulars
> Phenolic pine multilayer (vertical stratification)
> High density polyurethane foam .
 
The choice is made based on the work to be carried out

ALUMINUM SOLID OR TUBOLARS

MULTILAYERS

POLIURETANO ESPANSO ALTA DENSITA'

EXAMPLE: CABINET DOOR
> Perimetral frame on the head side, in 60 mm plywood for processing 45 ° socket side.
> Perimetral frame on a long side, in 60 mm plywood for inserting hinges.
> Perimetral frame on 2 sides, in 60 mm plywood for edging.
EXAMPLE : SLIDING DOOR
> Perimetral frame on the head side, in 80 mm plywood for "Magic" series sliding rail insertion.
> Internal plywood, in 120 x 200 mm plywood for insertion of recessed handle
> Perimetral frame on 2 sides, in multilayer 20 mm for edging.

3B-LAB s.r.l -  Sede operativa: Via G.Galilei, 10 - 22075 Lurate Caccivio - Co - Italy

 Tel. +39.031.49 00 78   -  email: sales@3b-lab.com 

Sede legale - Via Marsala, 31 - 21052 Busto Arsizio - Va - Italy- P.IVA  Cod.Fisc. IT03607200122  -  Cap. Soc. €  75.000,00